The photographs below are of a Victorian Tiled Hallway I recently restored in Stafford. This lovely floor was discovered underneath laminate flooring I can only assume because a previous owner of the house couldn’t work out how to restore it as it was in a terrible state and decided to cover it up.
Fortunately thanks to the power of the internet the current owner discovered Tile Doctor on-line and called us in to have a look with the aim of restoring the floor as a period feature.
Restoring a Victorian Tiled Hallway
Laminate is laid as a floating floor so unlike vinyl or carpet coverings that I usually deal with the laminate had if anything protected what was essential a very dirty Victorian tiled floor that was stained with adhesive and paint splashes.
With the laminate flooring already removed by the owner my preparation consisted of adding protection to the wooden paintwork. Once done I started to tackle the dirt by applying a strong dilution of Tile Doctor Pro-Clean and leaving it to soak into the tile and grout for about fifteen minutes. Then with a rotary machine fitted with a black scrubbing pad and running at slow speed I set about scrubbing the floor to get as much ingrained dirt out of pores of the Victorian floor tiles as possible. Once that was done I rinsed off the now soiled cleaning solution with water and then extracted it with a wet vacuum.
This action made a huge difference to the tile and grout, but the paint and adhesive stains were more difficult to remove so these areas were treated with Tile Doctor Remove and Go assisted with a steamer to help draw the staining out.
With the tile ad grout now clean of dirt and stains I gave the floor a rinse with water to remove any trace of cleaning products and then extracted as much moisture from as possible using the wet vacuum. I then left for the day allowing the floor to dry off fully overnight.
Sealing Victorian floor Tiles
The next day I confirmed the floor had dried off and then proceeded to apply five coats of Tile Doctor Seal & Go Extra which is a fully breathable sealer that adds a lovely shine to the tiles. I used a fully breathable sealer as these old houses were built before the invention of the damp proof course and I wanted to ensure that any moisture could rise through the floor and evaporate unhindered.
The final photograph shows the huge transformation I achieved with the floor and as you can imagine my customer was very happy with the result.
Victorian tiled hallway floor Restored in Stafford
The photographs below were taken at a private residence in the town of Stafford, the owner of the house was unhappy with the state of the grout lines in their ceramic tiled shower which had, over time, had become grey and stained. As you cans see from the photograph, the whole area in general was very tired looking. I recommended a grout clean, colouring and seal to get the shower back to looking its best. My client was happy with me to proceed and I promptly began the work.
Grout Colouring including Prep
My first task was to clean the grout using a grout colouring pre-treater which cleans and prepares the grout joints to make a better bond with the colourant. The tiles were then given a rinse and dried before I stripped out the old sealant strip between the tiles and shower tray.
My next task was to carefully apply a white Grout Colourant along the grout lines using an applicator brush. The colourant is basically painted onto the grout and any excess is wiped off the adjacent tile before it dries. The colourant, which is available in a range of shades, is an epoxy based product that both recolours and seals the grout lines to provide protection against dirt and stains.
To finish off the job I applied fresh sealant between the shower tray and bottom row of tiles in a matching white. The whole shower took on a much fresher appearance after I finished and looked transformed.
My client contacted me two weeks after I completed the job to happily inform me that my work had actually solved a leakage problem that have been affecting the shower cubicle. With the addition of a robust clean, colouring and seal, my client was very pleased with the results.
Refreshing a Ceramic Tiled Shower Cubicle in Staffordshire
This classic Victorian tiled floor was installed in the hallway of a house in the town of Weeping Cross, Staffordshire. The floor was in pretty good condition but had become dull and was in need of a deep clean to put some life back in the tiles, there was also evidence an old adhesive around the edges indicating it had been covered by carpet at some point.
The Remove and Go NanoTech worked well on the stubborn adhesive so I went onto clean the rest of the floor using the same product combination but this time worked in using a rotary machine fitted on slow speed with a black scrubbing pad pad. The resulting soiled solution was vacuumed up using a wet pick up machine and the floor left to dry overnight.
Sealing Victorian floor Tiles
The next morning I mopped the floor with a damp mop and then when it was dry applied four coats of Tile Doctor Seal & Go which is a recommended protective sealer for Victorian tiles and leaves a nice shine on the floor. As you can see it looks fantastic and when the owners came home they were thrilled with the results and left the comment below on the Tile Doctor feedback system.
“Trevor has done a great job with our tiled floor, we are so pleased with the results! We would definitely recommend him! Mark Broomhall, Stafford”
Victorian hallway floor tiles cleaned in Staffordshire