I’ve seen a few Victorian Tiled floors in my time and I can tell you the condition of this particular floor was one of the worst I’ve seen in a while. The tiles had been covered up with carpet tiles which had been stuck down with a strong adhesive and there was still a fair amount of carpet tile backing that needed removing, grout was also missing in places and I could see a fair amount of work would need to be done to get this floor restored.
 |
 |
Cleaning Victorian Floor Tiles
The first job was to clean what I could of the floor and remove the remaining carpet tile so working in sections I applied Tile Doctor Pro-Clean and scrubbed it into the tiles carefully scraping off the tile backing as I went. There were a lot of tiles to cover so as you can imagine this was quite a painstaking process and I was literally working on one time at a time to get the job done. Once complete the floor was given a thorough rinse to remove any cleaning products and soiled cleaning solution which was then removed using a wet vacuum.
Once the floor was clean it was evident that some tiles were loose and needed resetting and others would need grouting so I set about doing this making sure to use a matching grout.
Sealing Victorian floor Tiles
I left the floor to dry overnight and came back the next day to seal the tiles. Fortunately they had dried overnight so I applied four coats of Tile Doctor Seal & Go. This is an ideal sealer for Victorian tiles as it adds a classic shine to the floor and will provide good protection from stains going forward. I think you will agree the floor has been transformed and now loos amazing, certainly the customer was very happy.
 |
 |
If you struggle to remove the glue using Pro-Clean then switch to Tile Doctor Remove and Go, it shifts most things and will definitely handle adhesives.