Stains Removed from Limestone Tiled Kitchen Floor in Tutbury

First of all apologies for the quality of the photographs on this page, I clearly need to work on my photography skills. Normally photographs like these wouldn’t make the website site however they did capture the stain quite well so I thought they would be worth including. The customer who lives at a large house near Tutbury had a spillage on the lovely Limestone floor tiles in her kitchen which she tried to clean with different chemicals including bleach which just made the problem worse.

The trouble with bleach is it’s a strong acid which will eat through the sealer on your stone tiles, which in this case resulted in whitish circles you can see in the middle of the photograph below.

Limestone Tiled Kitchen Floor in Tutbury Before Stain Removal

The tiles were overdue a deep clean anyway so the owner called me in to renovate the floor and hopefully remove the staining.

Removing Staining from Limestone Tiled Floor

I started the process by giving the floor an initial clean with Tile Doctor Pro-Clean which is a strong alkaline tile cleaning product. This wouldn’t address the staining problem but my intention was to get the grout clean and also remove any surface dirt and grit from the floor. The cleaning solution was scrubbed in and then rinsed off with water which was then extracted using a wet vacuum.

The best method for restoring the appearance of Limestone floor tiles requires stripping back the surface of the tile and then building back the polish of the stone using a process we call burnishing. To do this we use a set of diamond encrusted pads which come in different grades from coarse to very fine. The pads are applied using a floor buffer machine and each pad does a different job and you start with the course red pad together with a little water and then carry on with the white, then yellow pad again using a little water removing the soiled water along the way.

Although the floor now looked great the bleach had done more damage than first anticipated and had stripped the stone of its natural oils where the spillage had been. To rectify this I applied Tile Doctor Stone Oil to the floor which I’m happy to say resolved the problem.

Sealing Limestone Tiles

Once the Stone Oil has soaked in I followed up with the application of Tile Doctor Colour Grow which is a specially designed stone sealer that penetrates into the pores of the stone protecting it from within whilst enhancing the deep natural colours in the stone. The floor was then left for about one hour to dry before working in Tile Doctor Shine powder with a white buffing pad to give a really deep robust finish.

Limestone Tiled Kitchen Floor in Tutbury After Stain Removal

The floor was transformed after I had finished and before leaving I made sure to advise the owner on the correct way to maintain her floor in future.
 
 

Polishing Limestone Floor Tiles in a Staffordshire Kitchen

Limestone tiles cleaned and polished in Burton on Trent

This Limestone tiled floor was installed in a Kitchen at a house near Burton on Trent. You can see from the photographs below that the Limestone had lost its polished appearance and was trapping dirt on the surface including a few stubborn marks; the grout was also looking grubby and dark.

Limestone Floor Before Limestone Floor Before

Cleaning a Limestone Tiled Floor

Restoring the shine on a polished stone such as Limestone, Travertine or Marble requires the surface to be stripped back and then buffed, which we did by using a set of burnishing pads. These diamond encrusted pads come in different grade sand each one does a different job from scrubbing to polishing. I started with the course red pad together with a little water and then carried on with the white, then yellow pads again using a little water removing the soiled water along the way. Finally when I had dried the floor I used a green pad to buff the floor up. This activity took most of the day so left the floor to dry off overnight.

Sealing Limestone Tile

On our return the next day the floor was given a quick wipe with a damp mop to get remove any debris or dust that may have landed on the floor overnight. This soon dried and we were able to apply two coats of Tile Doctor Colour Grow which is a specially designed stone sealer that brings out the deep colour of the stone. Once this had dried it was given a quick once over with a white buffing pad fitted to a rotary machine on a slow speed, this step ensures any excess sealant is removed off the tiles.

The floor was then left for about one hour to dry before working in Tile Doctor Shine powder with a buffing pad to give a really deep finish. We were still not finished however; the grout was still looking grubby so we agreed with the customer to pop back the next day and apply Tile Doctor Grout Colourant in a Sandstone colour.

Limestone Floor After Limestone Floor After

When we had finished the customer was very happy with the work we done and even commented that it looked better than when they first had the floor laid. I recommended that for future maintenance and to extend the life of the sealer they should use Tile Doctor neutral cleaner, it’s a PH neutral cleaner and so is safe to use on sealed stone.

Limestone Tile Maintenance in Burton on Kent