Changing the Grout Colour of a Tiled Shower Cubicle in Birmingham

This Ceramic tiled shower cubicle was installed at house in Birmingham, although the Ceramic tiles were in reasonable condition the customer wanted the grout to be refreshed. Ten years ago it would have been necessary to scrape out the top layer of grout and replace however the modern grout colourant kits allow you to achieve the same effects for a lot less expense.

Grout Colouring Bathroom Before Grout Colouring Bathroom Before

Cleaning Tile and Grout

The first job was to clean the grouting with a dilution of Tile Doctor Pro-Clean worked in by hand using a scrubbing brush, we also removed the towel radiator on one wall to make sure we could get to the grout behind. Pro-Clean is a very effective tile and grout cleaner that’s good at getting grease & grime out of the grouting, this process also provides a good foundation for the grout colourant which needs a clean surface. If you’re cleaning the grout yourself you may want to consider using Tile Doctor Oxy-Pro instead as it’s a similar product that is ready to use.

Once the grout was dry Grout Colourant in a Linen colour was applied into the grout lines and the excess wiped off, I then cleaned off all the excess Grout Colourant from the tile surface and gave the tiles a good clean. As you can see it made a big difference to the bathroom and I think you will agree the choice of Linen colourant worked well and blended in well with the colour of the tiles needless to say the customer was delighted.

Grout Colouring Bathroom After Grout Colouring Bathroom After

I should mention that the Grout Colourant range supplied by Tile Doctor also seals the grout preventing it from staining and therefore ensuring it will look good for some time to come.

Grout Colouring a Ceramic Tiled bathroom in Birmingham< /h3>

Limestone tiles cleaned and polished in Burton on Trent

This Limestone tiled floor was installed in a Kitchen at a house near Burton on Trent. You can see from the photographs below that the Limestone had lost its polished appearance and was trapping dirt on the surface including a few stubborn marks; the grout was also looking grubby and dark.

Limestone Floor Before Limestone Floor Before

Cleaning a Limestone Tiled Floor

Restoring the shine on a polished stone such as Limestone, Travertine or Marble requires the surface to be stripped back and then buffed, which we did by using a set of burnishing pads. These diamond encrusted pads come in different grade sand each one does a different job from scrubbing to polishing. I started with the course red pad together with a little water and then carried on with the white, then yellow pads again using a little water removing the soiled water along the way. Finally when I had dried the floor I used a green pad to buff the floor up. This activity took most of the day so left the floor to dry off overnight.

Sealing Limestone Tile

On our return the next day the floor was given a quick wipe with a damp mop to get remove any debris or dust that may have landed on the floor overnight. This soon dried and we were able to apply two coats of Tile Doctor Colour Grow which is a specially designed stone sealer that brings out the deep colour of the stone. Once this had dried it was given a quick once over with a white buffing pad fitted to a rotary machine on a slow speed, this step ensures any excess sealant is removed off the tiles.

The floor was then left for about one hour to dry before working in Tile Doctor Shine powder with a buffing pad to give a really deep finish. We were still not finished however; the grout was still looking grubby so we agreed with the customer to pop back the next day and apply Tile Doctor Grout Colourant in a Sandstone colour.

Limestone Floor After Limestone Floor After

When we had finished the customer was very happy with the work we done and even commented that it looked better than when they first had the floor laid. I recommended that for future maintenance and to extend the life of the sealer they should use Tile Doctor neutral cleaner, it’s a PH neutral cleaner and so is safe to use on sealed stone.

Limestone Tile Maintenance in Burton on Kent

Slate tile maintained in Bridgenorth

This slate tiled floor was installed in the Kitchen of a house in the town of Bridgenorth which is in the Severn Valley Staffordshire. The owner of the house wanted to have the floor deep cleaned and re-sealed and so gave us a call.

Cleaning black slate floor tiles

We set about cleaning the kitchen floor with a mixture of Tile Doctor Pro-Clean mixed 50/50 with Tile Doctor Nano-tech Ultraclean which was worked into the pores of the slate tile using a slow speed rotary machine fitted with a Polyscrub scrubbing pad which can reach down into grouting as well as scrubbing the floor. I then used a wet vacuum to remove the resultant soiled solution before rinsing the floor down twice with cold water, this also neutralises the floor prior to sealing.

Slate Floor Before Cleaning Slate Floor Before Cleaning

Sealing Slate floor tiles

I left the floor overnight to dry then came back next day and used a damp test meter to verify the floor was dry and ready for sealing. Once happy I proceed to apply three coats of Tile Doctor Seal & Go which as you can see from the photograph below has really brought out the natural colours in the slate. I used a water test after the third coat was dry to see if the water would form bubble on the surface thus indicating it was dry, which it did thereby indicating the floor was fully sealed.

Slate Floor After Cleaning Slate Floor After Cleaning

Overall the job took two days and I’m happy report the customer was delighted with the outcome.

Slate tiled Kitchen floor Cleaned and Sealed in Staffordshire

Slate tiled floor cleaned and sealed in Burton on Trent

This slate tiled floor was installed in a Kitchen in Burton on Trent, Staffordshire. The owner of the house felt it was time to get it cleaned and re-sealed so gave us a call.

Cleaning black slate floor tiles

We set about cleaning the kitchen floor with a mixture of Tile Doctor Pro-Clean mixed 50/50 with Tile Doctor Nano-tech Ultraclean which was worked into the pores of the slate tile using a slow speed rotary machine fitted with a Polyscrub scrubbing brush which can reach down into grouting as well as scrubbing the floor. I then used a wet vacuum to remove the resultant soiled solution before rinsing the floor down twice with cold water, this also neutralises the floor prior to sealing.

Slate Floor Before Cleaning

Sealing Slate floor tiles

I left the floor overnight to dry then came back next day and used a damp test meter to verify the floor was dry and ready for sealing. Once happy I proceed to apply three coats of Tile Doctor Seal & Go which as you can see from the photograph below has really brought out the natural colours in the slate. I used a water test after the third coat was dry to see if the water would form bubble on the surface thus indicating it was dry, which it did thereby indicating the floor was fully sealed.

Slate Floor After Cleaning
Overall the job took two days and I’m happy report the customer was amazed with the outcome and very pleased.

Slate tiled Kitchen floor maintained in Staffordshire