Laminate Covered Victorian Tiled Hallway Restoration in Stafford

The photographs below are of a Victorian Tiled Hallway I recently restored in Stafford. This lovely floor was discovered underneath laminate flooring I can only assume because a previous owner of the house couldn’t work out how to restore it as it was in a terrible state and decided to cover it up.

Fortunately thanks to the power of the internet the current owner discovered Tile Doctor on-line and called us in to have a look with the aim of restoring the floor as a period feature.

Victorian Tiled Hallway Before Restoration Stafford

Restoring a Victorian Tiled Hallway

Laminate is laid as a floating floor so unlike vinyl or carpet coverings that I usually deal with the laminate had if anything protected what was essential a very dirty Victorian tiled floor that was stained with adhesive and paint splashes.

With the laminate flooring already removed by the owner my preparation consisted of adding protection to the wooden paintwork. Once done I started to tackle the dirt by applying a strong dilution of Tile Doctor Pro-Clean and leaving it to soak into the tile and grout for about fifteen minutes. Then with a rotary machine fitted with a black scrubbing pad and running at slow speed I set about scrubbing the floor to get as much ingrained dirt out of pores of the Victorian floor tiles as possible. Once that was done I rinsed off the now soiled cleaning solution with water and then extracted it with a wet vacuum.

This action made a huge difference to the tile and grout, but the paint and adhesive stains were more difficult to remove so these areas were treated with Tile Doctor Remove and Go assisted with a steamer to help draw the staining out.

With the tile ad grout now clean of dirt and stains I gave the floor a rinse with water to remove any trace of cleaning products and then extracted as much moisture from as possible using the wet vacuum. I then left for the day allowing the floor to dry off fully overnight.

Sealing Victorian floor Tiles

The next day I confirmed the floor had dried off and then proceeded to apply five coats of Tile Doctor Seal & Go Extra which is a fully breathable sealer that adds a lovely shine to the tiles. I used a fully breathable sealer as these old houses were built before the invention of the damp proof course and I wanted to ensure that any moisture could rise through the floor and evaporate unhindered.

Victorian Tiled Hallway After Restoration Stafford

The final photograph shows the huge transformation I achieved with the floor and as you can imagine my customer was very happy with the result.
 
 

Victorian tiled hallway floor Restored in Stafford

Limestone tiles cleaned and polished in Burton on Trent

This Limestone tiled floor was installed in a Kitchen at a house near Burton on Trent. You can see from the photographs below that the Limestone had lost its polished appearance and was trapping dirt on the surface including a few stubborn marks; the grout was also looking grubby and dark.

Limestone Floor Before Limestone Floor Before

Cleaning a Limestone Tiled Floor

Restoring the shine on a polished stone such as Limestone, Travertine or Marble requires the surface to be stripped back and then buffed, which we did by using a set of burnishing pads. These diamond encrusted pads come in different grade sand each one does a different job from scrubbing to polishing. I started with the course red pad together with a little water and then carried on with the white, then yellow pads again using a little water removing the soiled water along the way. Finally when I had dried the floor I used a green pad to buff the floor up. This activity took most of the day so left the floor to dry off overnight.

Sealing Limestone Tile

On our return the next day the floor was given a quick wipe with a damp mop to get remove any debris or dust that may have landed on the floor overnight. This soon dried and we were able to apply two coats of Tile Doctor Colour Grow which is a specially designed stone sealer that brings out the deep colour of the stone. Once this had dried it was given a quick once over with a white buffing pad fitted to a rotary machine on a slow speed, this step ensures any excess sealant is removed off the tiles.

The floor was then left for about one hour to dry before working in Tile Doctor Shine powder with a buffing pad to give a really deep finish. We were still not finished however; the grout was still looking grubby so we agreed with the customer to pop back the next day and apply Tile Doctor Grout Colourant in a Sandstone colour.

Limestone Floor After Limestone Floor After

When we had finished the customer was very happy with the work we done and even commented that it looked better than when they first had the floor laid. I recommended that for future maintenance and to extend the life of the sealer they should use Tile Doctor neutral cleaner, it’s a PH neutral cleaner and so is safe to use on sealed stone.

Limestone Tile Maintenance in Burton on Kent