Rejuvenating a Sandstone Tiled Floor at a Barn Conversion in Rugeley

The owners of this barn conversion in Rugeley had got to breaking point with their large Sandstone tiled kitchen and utility floor. They had tried various different cleaning methods without success to clean the floor, but it always appeared grimy, and they suspected it had not been sealed following installation.

Sandstone kitchen floor before cleaning Rugeley

This would make sense: a lack of sealer would have allowed the dirt to become ingrained in the stone, making it impossible to clean. Interestingly their next door neighbour had suffered the same problem and decided to replace the floor entirely. The property owners were seriously considering the same as a solution, that is until they as found Tile Doctor. I was called down to the property to see what could be done.

Sandstone kitchen floor before cleaning Rugeley

Removing Ingrained Dirt from Sandstone Tiles

To begin the cleaning process, I applied a strong, undiluted quantity of Tile Doctor Pro Clean to the floor and left it to dwell for a few minutes. This allows the high alkaline cleaner to seep into the pores of the stone to begin to break down the ingrained dirt. After the short dwelling period, I scrubbed the floor using a rotary machine with a black pad attached.

With the tiles clean, I then focused specifically on cleaning the grout lines and edges of the floor using a grout brush in combination with a steamer. Finally, I rinsed the floor with cold water, before vacuuming up the resulting cleaning slurry before leaving the tiles to dry completely overnight. The drying period is exceptionally important because excess moisture can cloud any new sealers and damage their performance.

Sealing Sandstone Tiles

I returned to the property the next day to find the clean tiles showing some signs of damp. It’s possible that the property, being a barn conversion, does not have a damp proof membrane installed beneath the floor, making these sorts of issues inevitable.

To be on the safe side, I opted to seal the Sandstone tiles with Tile Doctor Seal and Go Extra, which allows full moisture vapour transmission, making it fully breathable and ideal for these situations. It also provides durable protection against ingrained dirt and stains and does a good job enhancing the look of the tiles.

Sandstone kitchen floor after cleaning Rugeley

The customers were very happy with the result, and left the comment below on the Tile Doctor Feedback system.

WONDERFUL, delight to have Trevor restoring my very tired flagstone kitchen floor, it is now beautiful. Many thanks Trevor a job very well done.

I’m sure they were also relieved that they won’t have to go to the expense of replacing their fantastic Sandstone tiled floor. What was Once a problem is now a real asset to the property.

Sandstone kitchen floor after cleaning Rugeley

 
 

Dirty Sandstone Tiled Floor Restored at a Staffordshire Barn Conversion

Quarry Tiled Kitchen Floor Deep Cleaned and Sealed in Tutbury

This Quarry tiled kitchen floor was in very good condition, with no cracked or broken tiles. However, my customer, who lives in the town of Tutbury, near Burton-on-Trent, was keen to boost the condition of the tiles further through professional maintenance, including a deep clean and a fresh seal to restore the sheen to the Quarry. NB, did you know it’s estimated that Tutbury has actually been inhabited for 3000 years, having once been the site of an Iron Age hill fort, this house of course was a lot more recent.

Quarry Tiled Kitchen Before Cleaning in Tutbury Burton on Trent Quarry Tiled Kitchen Before Cleaning in Tutbury Burton on Trent

Cleaning a Quarry Tiled Kitchen Floor

To clean the tiles, I chose to use our tried and trusted alkaline cleaner, Tile Doctor Pro Clean. We use Pro Clean on most types of natural stone floor, including Quarry, Slate, and Victorian. I applied Pro Clean liberally across the floor and left it to dwell for a short period, giving it time to seep into the tile to get underneath and lift out any ingrained dirt. The cleaner was then agitated using a scrubbing pad fitted to a rotary machine to remove the dirt and other general muck.

I then rinsed the floor with cold water and soaked up the resulting slurry with a wet-vac machine. Some areas of the floor proved to be quite stubborn to clean, so in these areas the cleaning process was repeated until satisfactory results were achieved. Finally, the floor was given another rinse and left to dry off overnight.

Sealing a Quarry Tiled Kitchen Floor

The next day I returned to the property and checked that the floor was ready to seal by running several damp tests, with the results indicating that was no excess moisture remaining on the tiles. We carry out these tests before sealing because moisture can cloud the sealer and prevent it from properly protecting the tiles.

My choice of sealer was Tile Doctor Seal & Go, a cost effective topical sealer that builds up a robust layer of protection on the surface of the floor and provides a durable sheen finish that, as you can see from the photographs, really lifts the appearance of the tiles.

Quarry Tiled Kitchen After Cleaning in Tutbury Burton on Trent Quarry Tiled Kitchen After Cleaning in Tutbury Burton on Trent

It’s a fact that any sealed tiled floor will need to be regularly maintained as sealers do wear off over time, especially in the high traffic areas, and this is when the floor starts to lose its appearance as dirt becomes trapped in the pores of the stone. The life of the sealer can be extended however by ensuring you only clean the floor with a PH Neutral cleaner.
 
 

Professional Quarry Tile Floor Maintenance Staffordshire

Quarry Tiled Kitchen Floor Restored in Stoke-on-Trent

Here’s a job I recently completed in the heartland of the English pottery industry, Stoke-on-Trent. In this particular instance I was commissioned by my client to restore the appearance of the Quarry tiled floor in her kitchen which as you can see from the photo below was far from looking it’s best. Quarry tiles are typically a very hard wearing stone, but in high traffic areas like a kitchen, even this type of tile will require regular maintenance.

Kitchen Quarry Tiles Before Restoration Stoke-on-Trent

Cleaning a Quarry tiled floor

My first task, before beginning the restoration, was to remove the kickboards from around the bottom of the kitchen units, to prevent them from being damaged during the process. The next step was to acid wash the tiles using Tile Doctor Grout Clean-Up which was scrubbed into the tiles to remove old grout and plaster that had become stuck to the surface of the tiles at some point in the past. Once this had done its job I rinsed the entire floor with water washing away the excess soiled residue and any trace of acid.

The next step was to give the tiles a good clean using Tile Doctor Pro Clean, which is a high alkaline cleaner suitable for use on a range of natural stone floors. This was left to dwell on the tiles for ten minutes, allowing it time to seep into the stone to get underneath – and lift out – the ingrained dirt. I then agitated the solution with a scrubbing brush to remove the muck from the surface of the tiles. The floor was then given another rinse with water, and this was extracted using a wet vacuum.

Sealing a Quarry tiled floor

I left the floor to dry after cleaning for more than 24 hours, making sure that it would be ready for sealing the next day. Upon my return to the house I checked the floor was dry and then sealed the floor using four coats of Tile Doctor Seal & Go, which provides a robust surface seal and a durable low-sheen finish. The product is suitable for use on internal, unsealed, porous surfaces.

Kitchen Quarry Tiles After Restoration Stoke-on-Trent

The photographs above bears witness to the massive improvement which has been made to the quarry tiles, which has not only completely transformed the look of the tiles but also the appearance of the kitchen.
 
 

Restoring a Quarry tiled kitchen floor in Staffordshire

Dirty and Worn Slate Tiled Kitchen Floor Restored in Burton-on-Trent

This slate floor was installed in the kitchen of a house in the town of Burton-on-Trent in Staffordshire. As the name suggests, Burton-on-Trent sits alongside the River Trent, which runs through most of the northern Midlands. The old sealer on my client’s Slate tiled kitchen floor had completely worn off and, as a result, dirt had become ingrained in the pores of the stone which was now in need of restoration.

Slate is typically a very durable tile, having been used both residentially and commercially for hundreds of years but, in particularly high traffic areas like kitchens it’s important to maintain the sealer or dirt will get into the pores of the stone making the floor difficult to clean effectively and leading to the tile looking worse for wear. I was commissioned to get the floor back to good health and I prescribed a deep clean and re-seal.

Slate Tiled Floor Before Cleaning Burton-on-Trent Slate Tiled Floor Before Cleaning Burton-on-Trent

Cleaning a dirty Slate tiled floor

To start the cleaning process, I first diluted Tile Doctor Pro-Clean and water and left it to soak into the floor for a while so it could get to work lifting out the dirt from the pores of the stone. Pro-Clean is a versatile, high alkaline cleaner safe to use on natural stone which can be diluted in different strengths depending on the level of soil build-up. In this case, I opted for a reasonably strong solution due to the significant amount of ingrained dirt (as shown by the photographs).

After about ten minutes I started working in small sections to agitate the tiles with a scrubbing pad attached to a rotary machine. The pad and machine take a lot of the hard work out of the cleaning process although I usually do the grout by hand using a stiff scrubbing brush. Once I had finished the initial clean, I rinsed the entire floor with water, before repeating the process multiple times until I was satisfied that I had got the Slate tiles as clean as possible.

Sealing a Slate Tiled Floor

After completing the clean, I left the house for a few days to allow the floor enough time to dry before being sealed. As any Tile Doctor will tell you, all moisture must be removed from a tiled floor before sealing it, as it has the potential to compromise the effectiveness of the sealer.

Once I was satisfied that the floor was completely dry, I sealed the tiles using four coats of Tile Doctor Seal & Go, which provides a stain resistant surface seal and a nice, low sheen finish. Seal & Go is a water based product (so no smell) and is suitable for use on a wide variety of unsealed, porous surfaces as Slate, Victorian tile, Sandstone, and textured Quarry tiles.

Slate Tiled Floor After Cleaning Burton-on-Trent Slate Tiled Floor After Cleaning Burton-on-Trent

As you can see, the overall results were fantastic and my client was really happy with the difference I’d been able to achieve.
 
 

Restoring Slate Tiled Floor in Burton-on-Trent

Grout Cleaning and Grout Colouring of a Dull Shower Cubicle in Stafford

The photographs below were taken at a private residence in the town of Stafford, the owner of the house was unhappy with the state of the grout lines in their ceramic tiled shower which had, over time, had become grey and stained. As you cans see from the photograph, the whole area in general was very tired looking. I recommended a grout clean, colouring and seal to get the shower back to looking its best. My client was happy with me to proceed and I promptly began the work.

Grout Colouring Ceramic shower tiled cubicle in stafford before

Grout Colouring including Prep

My first task was to clean the grout using a grout colouring pre-treater which cleans and prepares the grout joints to make a better bond with the colourant. The tiles were then given a rinse and dried before I stripped out the old sealant strip between the tiles and shower tray.

My next task was to carefully apply a white Grout Colourant along the grout lines using an applicator brush. The colourant is basically painted onto the grout and any excess is wiped off the adjacent tile before it dries. The colourant, which is available in a range of shades, is an epoxy based product that both recolours and seals the grout lines to provide protection against dirt and stains.

To finish off the job I applied fresh sealant between the shower tray and bottom row of tiles in a matching white. The whole shower took on a much fresher appearance after I finished and looked transformed.

Grout Colouring Ceramic shower tiled cubicle in stafford after

My client contacted me two weeks after I completed the job to happily inform me that my work had actually solved a leakage problem that have been affecting the shower cubicle. With the addition of a robust clean, colouring and seal, my client was very pleased with the results.
 
 

Refreshing a Ceramic Tiled Shower Cubicle in Staffordshire

Slate tiled kitchen floor refreshed in Burton on Trent

Pictures below of a slate tiled kitchen floor that I recently maintained at a house in Burton on Trent. The problem was the usual one that the sealer had worn down and the floor had lost its polished look leaving it dull and the owner of the house wanted it looking new again.

Cleaning black slate floor tiles

The floor was cleaned using a dilution of Tile Doctor Pro-Clean which was left to soak into the slate for ten minutes before being worked into the tile using a rotary machine fitted with a scrubbing pad. The process was repeated where there were stubborn stains and then the whole floor was washed down to remove the soiled cleaning solution and any trace of product. The floor was then dried as much as possible using a wet vacuum and left to fully dry overnight.

Slate Tiles in Burton on Trent Before Cleaning Slate Tiles in Burton on Trent Before Cleaning

Sealing Slate floor tiles

I left the floor overnight to dry then came back next day and used a damp test meter to verify the floor was dry and ready for sealing. Once happy I proceed to apply four coats of Tile Doctor Seal & Go which as you can see from the photograph below has really brought the slate back to life.

Slate Tiles in Burton on Trent After Cleaning Slate Tiles in Burton on Trent After Cleaning

The customer was delighted with the transformation of the floor.
 
 

Slate tiled Kitchen floor Cleaned and Sealed in Staffordshire

Renovating a Victorian Tiled Hallway floor in Stoke on Trent

I’ve seen a few Victorian Tiled floors in my time and I can tell you the condition of this particular floor was one of the worst I’ve seen in a while. The tiles had been covered up with carpet tiles which had been stuck down with a strong adhesive and there was still a fair amount of carpet tile backing that needed removing, grout was also missing in places and I could see a fair amount of work would need to be done to get this floor restored.

Victorian Tiled Floor Before Cleaning in Stoke-on-Trent Victorian Tiled Floor Before Cleaning in Stoke-on-Trent

Cleaning Victorian Floor Tiles

The first job was to clean what I could of the floor and remove the remaining carpet tile so working in sections I applied Tile Doctor Pro-Clean and scrubbed it into the tiles carefully scraping off the tile backing as I went. There were a lot of tiles to cover so as you can imagine this was quite a painstaking process and I was literally working on one time at a time to get the job done. Once complete the floor was given a thorough rinse to remove any cleaning products and soiled cleaning solution which was then removed using a wet vacuum.

Once the floor was clean it was evident that some tiles were loose and needed resetting and others would need grouting so I set about doing this making sure to use a matching grout.

Sealing Victorian floor Tiles

I left the floor to dry overnight and came back the next day to seal the tiles. Fortunately they had dried overnight so I applied four coats of Tile Doctor Seal & Go. This is an ideal sealer for Victorian tiles as it adds a classic shine to the floor and will provide good protection from stains going forward. I think you will agree the floor has been transformed and now loos amazing, certainly the customer was very happy.

Victorian Tiled Floor After Cleaning in Stoke-on-Trent Victorian Tiled Floor After Cleaning in Stoke-on-Trent

 
 

Victorian hallway floor tiles restored in Staffordshire

Grout Colouring Ceramic Floor Tiles in Tamwoth

This was a straight forward Grout Colouring job at a house in the market town of Tamworth, Staffordshire. The tiles had been installed with a white grout and over the years the grout had become darker as the dirt had become ingrained into the porous top layer. This is often the case with Porcelain and Ceramic tiles whose looks always outlive that of the grout.

Grout Colour Before Tamworth Grout Colour Before Tamworth

Cleaning and Colouring Grout

The customer was keen to get the grouting looking the same as it was when first installed and so with that aim in mind a dilution of Tile Doctor Pro-Clean was applied and scrubbed into the grout lines and then washed off with water. Pro-Clean is a strong alkaline cleaning product that does a good job cleaning up grout however it can only do so much and in this case although it made a difference there were many areas which were too stained.

The next step was to apply a grout colouring product, they come in a number of different colours and the best match to the original colour was Ivory. The Pro-Clean had already prepared the surface so no need to use a pre-treater, it was just a question of waiting for the grout to dry and then apply the colourant.

Applying grout colourant is fiddly work but you do get the pleasure of watching the floor become slowly transformed, also the colourant works as a sealant which will prevent staining and make the grout very easy to clean going forward.

Grout Colour After Tamworth Grout Colour After Tamworth

As you can see the floor looks like new and the customer was very happy.

Grout Colouring Floor Grout in Staffordshire

Victorian Tiled Hallway Restoration in Sutton Coldfield

This job was a full restoration of a Victorian tiled floor that had been hidden under those thin adhesive backed lino tiles (see photo below) in the hallway of a house in Sutton Coldfield.

Victorian Tiles Sutton Coldfield Before Restoration

Restoring Victorian Floor Tiles

The first job was to remove the vinyl tiles which being stuck onto the floor left a rather nasty looking floor. I knew from experience this would be tricky to remove and so soaked the floor in Tile Doctor Remove and Go (does what it says on the tin) and left it for a while to soften the glues. Then with a rotary machines fitted with a polyscrub brush attached running at slow speed set about scrubbing the floor to get as much glue of the Victorian floor tiles as possible. This process worked quite well however once I have removed the soiled solution using a wet vacuum I could see there were still quite a a few stubborn patches remaining. The solution was to get down on my hands & knees with a nylon brush, a scraper and more Remove and Go, as you can imagine it took a long time to get the floor really clean and when finished I gave the tile a thorough wash down with water to neutralise the floor and then left it overnight to dry.

Victorian Tiles Sutton Coldfield Before Restoration Victorian Tiles Sutton Coldfield Before Restoration

Sealing Victorian floor Tiles

The next day I confirmed the floor had dried and then proceeded to apply four coats of Tile Doctor Seal & Go which is the recommended sealer for Victorian tiles, it not only protects the tile it also leaves a nice shine on the floor.

The photographs show a huge transformation and my customer was absolutely delighted with the results, and left the comment below on the Tile Doctor feedback system.

Trevor had a very tough job to do getting our Victorian tiles into shape after decades under a Marley tile floor. They were covered in layers of hard glue but Trevor worked exceptionally hard restoring them to like new. Trevor was very friendly and punctual. An excellent job done and we would definitely recommend him.
Mr. G. Stendall, Sutton Coldfield, West Midlands

Victorian Tiles Sutton Coldfield After Restoration Victorian Tiles Sutton Coldfield After Restoration

 

Victorian tiled hallway floor Restored in Sutton Coldfield

Victorian Tiled Hallway floor cleaning in Weeping Cross

This classic Victorian tiled floor was installed in the hallway of a house in the town of Weeping Cross, Staffordshire. The floor was in pretty good condition but had become dull and was in need of a deep clean to put some life back in the tiles, there was also evidence an old adhesive around the edges indicating it had been covered by carpet at some point.

Victorian Tiled Floor Before Cleaning Victorian Tiled Floor Before Cleaning

Cleaning Victorian Floor Tiles

The first job was to remove the glue which I did with a small black scrubbing pad and a mixture of Tile Doctor Remove & Go combined with NanoTech UltraClean and a scraper.

The Remove and Go NanoTech worked well on the stubborn adhesive so I went onto clean the rest of the floor using the same product combination but this time worked in using a rotary machine fitted on slow speed with a black scrubbing pad pad. The resulting soiled solution was vacuumed up using a wet pick up machine and the floor left to dry overnight.

Sealing Victorian floor Tiles

The next morning I mopped the floor with a damp mop and then when it was dry applied four coats of Tile Doctor Seal & Go which is a recommended protective sealer for Victorian tiles and leaves a nice shine on the floor. As you can see it looks fantastic and when the owners came home they were thrilled with the results and left the comment below on the Tile Doctor feedback system.

Trevor has done a great job with our tiled floor, we are so pleased with the results! We would definitely recommend him!
Mark Broomhall, Stafford

Victorian Tiled Floor After Cleaning Victorian Tiled Floor After Cleaning

 

Victorian hallway floor tiles cleaned in Staffordshire

Victorian Quarry Tiled floor Restored in Leek

These old red and black Victorian quarry tiles at a house in Leek, Staffordshire, were in a bit of a state as you can see from the photographs below.

Quarry Tiles Before Cleaning Quarry Tiles Before Cleaning

Cleaning old Quarry Tiles

To clean the floor I applied a 50/50 mix of Tile Doctor Pro-Clean and NanoTech Ultra Clean diluted with water which was left to soak into the floor and then worked into the tile using a rotary machine fitted with a black scrubbing pad running at a slow speed. Pro-Clean is a strong alkaline cleaner and NanoTech Ultra Clean adds tiny abrasive particles to the solution that can help lift out the dirt.

After cleaning it I noticed that in places it was not as clean as I would of liked it, so to improve it further it necessary to get on my hands and knees and scrub them with a stronger dilution of the Pro-Clean and NanoTech UltraClean solution and a small black pad. This did the trick and so final step was to neutralise the floor tiles ready for sealing by giving them a good wash with clean water and then left it overnight to dry. A Wet Vacuum comes in handy during this process for removing fluids from the floor

Sealing old Victorian Quarry Tiles

The next day I wiped it over with a damp mop to get any dirt or dust that might have settled overnight and then when it was dry again I applied four coats of Tile Doctor Seal & Go using an air mover to help dry the floor quicker between coats.

Quarry Tiles After Cleaning Quarry Tiles After Cleaning

Seal and Go adds a nice low shine to the tile and as you can see the floor looked amazing afterwards, needless to say the customer was very pleased with the transformation and left the comment below.

“I found Trevor a very professional and dedicated workman. He would not let the job finish until he had got the best result.
Miss Jackie Spencer, Leek”

Quarry Tiles After Cleaning Quarry Tiles After Cleaning

 

Victorian Quarry Tiles transformed in Leak, Staffordshire

Changing the Grout Colour of a Tiled Shower Cubicle in Birmingham

This Ceramic tiled shower cubicle was installed at house in Birmingham, although the Ceramic tiles were in reasonable condition the customer wanted the grout to be refreshed. Ten years ago it would have been necessary to scrape out the top layer of grout and replace however the modern grout colourant kits allow you to achieve the same effects for a lot less expense.

Grout Colouring Bathroom Before Grout Colouring Bathroom Before

Cleaning Tile and Grout

The first job was to clean the grouting with a dilution of Tile Doctor Pro-Clean worked in by hand using a scrubbing brush, we also removed the towel radiator on one wall to make sure we could get to the grout behind. Pro-Clean is a very effective tile and grout cleaner that’s good at getting grease & grime out of the grouting, this process also provides a good foundation for the grout colourant which needs a clean surface. If you’re cleaning the grout yourself you may want to consider using Tile Doctor Oxy-Pro instead as it’s a similar product that is ready to use.

Once the grout was dry Grout Colourant in a Linen colour was applied into the grout lines and the excess wiped off, I then cleaned off all the excess Grout Colourant from the tile surface and gave the tiles a good clean. As you can see it made a big difference to the bathroom and I think you will agree the choice of Linen colourant worked well and blended in well with the colour of the tiles needless to say the customer was delighted.

Grout Colouring Bathroom After Grout Colouring Bathroom After

I should mention that the Grout Colourant range supplied by Tile Doctor also seals the grout preventing it from staining and therefore ensuring it will look good for some time to come.

Grout Colouring a Ceramic Tiled bathroom in Birmingham< /h3>

Limestone tiles cleaned and polished in Burton on Trent

This Limestone tiled floor was installed in a Kitchen at a house near Burton on Trent. You can see from the photographs below that the Limestone had lost its polished appearance and was trapping dirt on the surface including a few stubborn marks; the grout was also looking grubby and dark.

Limestone Floor Before Limestone Floor Before

Cleaning a Limestone Tiled Floor

Restoring the shine on a polished stone such as Limestone, Travertine or Marble requires the surface to be stripped back and then buffed, which we did by using a set of burnishing pads. These diamond encrusted pads come in different grade sand each one does a different job from scrubbing to polishing. I started with the course red pad together with a little water and then carried on with the white, then yellow pads again using a little water removing the soiled water along the way. Finally when I had dried the floor I used a green pad to buff the floor up. This activity took most of the day so left the floor to dry off overnight.

Sealing Limestone Tile

On our return the next day the floor was given a quick wipe with a damp mop to get remove any debris or dust that may have landed on the floor overnight. This soon dried and we were able to apply two coats of Tile Doctor Colour Grow which is a specially designed stone sealer that brings out the deep colour of the stone. Once this had dried it was given a quick once over with a white buffing pad fitted to a rotary machine on a slow speed, this step ensures any excess sealant is removed off the tiles.

The floor was then left for about one hour to dry before working in Tile Doctor Shine powder with a buffing pad to give a really deep finish. We were still not finished however; the grout was still looking grubby so we agreed with the customer to pop back the next day and apply Tile Doctor Grout Colourant in a Sandstone colour.

Limestone Floor After Limestone Floor After

When we had finished the customer was very happy with the work we done and even commented that it looked better than when they first had the floor laid. I recommended that for future maintenance and to extend the life of the sealer they should use Tile Doctor neutral cleaner, it’s a PH neutral cleaner and so is safe to use on sealed stone.

Limestone Tile Maintenance in Burton on Kent

Slate tile maintained in Bridgenorth

This slate tiled floor was installed in the Kitchen of a house in the town of Bridgenorth which is in the Severn Valley Staffordshire. The owner of the house wanted to have the floor deep cleaned and re-sealed and so gave us a call.

Cleaning black slate floor tiles

We set about cleaning the kitchen floor with a mixture of Tile Doctor Pro-Clean mixed 50/50 with Tile Doctor Nano-tech Ultraclean which was worked into the pores of the slate tile using a slow speed rotary machine fitted with a Polyscrub scrubbing pad which can reach down into grouting as well as scrubbing the floor. I then used a wet vacuum to remove the resultant soiled solution before rinsing the floor down twice with cold water, this also neutralises the floor prior to sealing.

Slate Floor Before Cleaning Slate Floor Before Cleaning

Sealing Slate floor tiles

I left the floor overnight to dry then came back next day and used a damp test meter to verify the floor was dry and ready for sealing. Once happy I proceed to apply three coats of Tile Doctor Seal & Go which as you can see from the photograph below has really brought out the natural colours in the slate. I used a water test after the third coat was dry to see if the water would form bubble on the surface thus indicating it was dry, which it did thereby indicating the floor was fully sealed.

Slate Floor After Cleaning Slate Floor After Cleaning

Overall the job took two days and I’m happy report the customer was delighted with the outcome.

Slate tiled Kitchen floor Cleaned and Sealed in Staffordshire

Slate tiled floor cleaned and sealed in Burton on Trent

This slate tiled floor was installed in a Kitchen in Burton on Trent, Staffordshire. The owner of the house felt it was time to get it cleaned and re-sealed so gave us a call.

Cleaning black slate floor tiles

We set about cleaning the kitchen floor with a mixture of Tile Doctor Pro-Clean mixed 50/50 with Tile Doctor Nano-tech Ultraclean which was worked into the pores of the slate tile using a slow speed rotary machine fitted with a Polyscrub scrubbing brush which can reach down into grouting as well as scrubbing the floor. I then used a wet vacuum to remove the resultant soiled solution before rinsing the floor down twice with cold water, this also neutralises the floor prior to sealing.

Slate Floor Before Cleaning

Sealing Slate floor tiles

I left the floor overnight to dry then came back next day and used a damp test meter to verify the floor was dry and ready for sealing. Once happy I proceed to apply three coats of Tile Doctor Seal & Go which as you can see from the photograph below has really brought out the natural colours in the slate. I used a water test after the third coat was dry to see if the water would form bubble on the surface thus indicating it was dry, which it did thereby indicating the floor was fully sealed.

Slate Floor After Cleaning
Overall the job took two days and I’m happy report the customer was amazed with the outcome and very pleased.

Slate tiled Kitchen floor maintained in Staffordshire